Interskol will resume production grinders

Interskol

The company «Interskol” announced the resumption of production of two new models of professional grinders: PSHM-115/300M and PSHM-115/350ЭМ.

Surface grinding machine successfully combine great performance with high reliability thanks to the powerful motor of special construction, designed for operation in continuous mode, and a large area cast grinding platform (115 x 210 mm) made of aluminum alloy. A special pad of porous polymer on the bottom of the platform will ensure a good fit snap-in to the work surface. The system of dynamic equilibrium significantly reduced the level of vibration on the arms of PSHM, allowing you to work long and effectively. Sealed bearings and aluminium bearing flange provide a long service life of the machine.

Surface grinding machine «Energomash» PSHM-115/300M and PSHM-115/350ЭМ able to effectively sand the wood and its derivatives (plywood, OSB, MDF, plywood, etc.), composite materials, various plastics and metals, the surface of the putty, coatings, artificial stone (based on acrylic resin and stone crumb). Mount snap-in executes one of two possible ways: "Velcro" velсro or under the clips located on the narrow sides of the platform. Thus, depending on the tasks and the available budget, users can choose between high-quality but relatively expensive finished sanding sheet with velcro and cheaper consumables, hand-chopped to the size of conventional sandpaper sold in rolls. The tool features a highly effective dust extraction system with built-in special soles pilotagem channels should be used together with a vacuum cleaner, which greatly improves the grinding efficiency and extends the life of tooling, allowing you to keep the workplace clean.

Professional surface grinding machine «Energomash» PSHM-115/300M optimal for accurate finishing of surfaces. This is facilitated by high frequency (20 000 rpm) and low amplitude (2 mm) of oscillation of the platform. Nominal power consumption is 300 W, weight-2,9 kg.

Professional surface grinding machine «Energomash» PSHM-115/350ЭМ is most suitable for pre-finishing (predinisone) surface treatment of various materials. The amplitude of oscillation of the platform is 4.5 mm, frequency – 13 000 rpm, there is provided an electronic unit stabilize (maintain) under load. Nominal power consumption of this model-350 W weight-2,9 kg.

Both models are produced in Russia. Recommended retail price professional grinders «Energomash» PSHM-115/300M and PSHM-115/350ЭМ when selling through online stores and are respectively 4185 4650 rubles, the start of sales is scheduled for August 2017.

Illustrations and photographs of the article:
interskol 115-300M

Comments:

To leave a comment you must log in or register

     

    SUBJECTS


    ADVERTISE WITH US