Wegoma proposed a new model manual кромкооблицовочного machine

manual facing machine Wegoma PM2000-TSL

The new model PM2000-TSL facing machine Wegoma differs from its predecessors: - the possibility of covering the edge of the height up to 65mm. - significantly increased volume adhesive baths coated with Teflon =400cm³. (for comparison Adamik, Virutex, Goliath =150 - 230cm³) is Designed for facing of the parts edge riding material PVC, ABS and natural veneer thickness from 0.4 to 3 mm facing machine PM2000-TSL can be used as a portable and stationary machine.

Hand edge machine PM2000-TSL works perfectly on rectilinear and curvilinear details on the outer radius and internal. This model manual machine has an electronic unit of temperature control this allows you to use melt glue with different temperatures of melting and work without problems on the edge of the PVC 0.4 mm of different manufacturer (especially PVC edge Chinese manufacturer), and the feed speed is edging material from 0 to 4.5 m/min, which is very important when working with PVC edge 2-3 mm when pasting the inner radius of the workpiece At the expense of the unit adjust the speed PM2000-TSL has the capability of producing pasting PVC edge 2 mm internal closed radius, which do not allow for other models. This allows the specialist to make a product of any shape сложости, and the designer has no restrictions to the desire of the customer.

For a smooth operation of the machine make sure to apply release spray WegoClean Wegoma that quickly and qualitatively clears and protects rubber rollers. When using the manual machine PM2000-TSL in the stationary mode is ideal new model of table SE2003 with the possibility of pasting pieces with a different slope (angle). For fixing the workpiece using PM2000-TSL as a manual machine, firm WEGOMA recommends the use of a vacuum holders: pneumatic DVS-S or EVS electric-S.

Technical characteristics: Voltage: 230V 50/60Hz Power: 765 W Width of edge: 12 – 65 mm edge Thickness: 0,4 – 3 mm feeding Speed: 0 – 4,5 m/min operating temperature: 120° - 200° the Amount of adhesive baths: 400 cm³ warm-up Time: 7 x 9 min dimensions: 300 x 240 x 260 ммВес: 8.7 kg package contents: Manual edge machine PM2000-TSL. Plastic transport box. Template under the cut for stationary use. Mount for fixed installation. Bolts for stationary use. 250 g of hot melt glue (120-200°C)

Illustrations and photographs of the article:
Wegoma PM2000-TSLWegoma PM2000-TSLWegoma PM2000-TSL grinding machineWegoma PM2000-TSL grinding machine
Author Олег Кретов (Wegoma),
4 December 2013.

Comments:

To leave a comment you must log in or register

     

    SUBJECTS


    ADVERTISE WITH US